SNH440R54U8W2三螺桿泵機械密封，轉速、具有自吸性能，其運轉時吸入性能也*。
?由于部件通用化、系列化，有底座式，支架式，浸沒式多種結構，可用于臥式，法蘭式和懸臂式安裝。

————網上找螺桿泵很糾結？選擇太多？真假難辨？?jī)r(jià)格沒底？——找不糾結,專注螺桿泵15年,,hstrby,hstrby,

SNH440R54U8W2三螺桿泵機械密封

SNH440R54U8W2三螺桿泵機械密封

1. 三螺桿泵是依靠泵體與螺桿所形成，當主動螺桿轉動時，帶動與其嚙合的從動螺桿 一起轉動，吸入腔一端的螺桿嚙合空間容積逐漸增大，壓力降低。液體在壓差作用下 進入嚙合空間容積。當容積增至zui大而形成一個密封腔時，液體就在一個個密封腔內 連續地沿軸向移動，直至排出腔一端。這時排出腔一端的螺桿嚙合空間容積逐漸縮小 

   Main fields of application
   Main fields of application are oil-firing and power engineering;
   hydraulic, maritime, and offshore engineering; machine tools;
   the chemical and petrochemical industries, the food industry,
   and the pulp and paper industry.
   Design
   The SN series is a three-screw, self-priming with
   hardened and ground spindles that rotate in a replaceable
   casing insert.
   The idler screws are hydraulically driven and axial thrust is
   fully coensated hydrostatically. A groove ball bearing
   lubricated with the pued liquid or an external greaselubricated groove ball bearing holds the drive screw in place.
   The shaft is sealed with either shaft seal rings or mechanical
   seals. A return pipe connects the seal chamber with the
   suction chamber. As a result, regardless of the current
   discharge pressure, only the suction/inlet pressure will affect
   the shaft seal.