SNH2900R46U8W2循環泵三螺桿油泵

選型提示 Notes for Pu Selection
1、選擇產品時，需要注意泵進口流速(包括進口管線流速)。一般進口流速控制在1 m/s以內，1一1.3 m/s需有條件選擇，大于1.3m/s需謹慎選擇或不選;
1 .Attentions shall be paid to the flow speed at pu inlet (including the flow in the inlet pipe) during selection. In general, the flowat inlet shall be controlled within 1m/s, the flow of 1}1.3m/s can be selected only when the conditions allowed, and the flow greaterthan 1.3m/s shall be selected conservatively or never.
2、由于電機轉速越高，泵進口流速越大，可靠性會有所降低，應綜合考慮泵的可靠使用，電機的選擇請根據選型步驟中的值選取;
2. Because the flow speed at pu inlet will rise up along with the increase of the motor speed, resulting into the decrease ofreliability, therefore, by taking into consideration of the reliable operation of the pu, the motor shall be selected according to therecommended value provided in the Procedures of Type Selection.
3、若輸送介質潤滑性較好，且溫度≤80℃，使用內置軸承結構的泵;若輸送介質潤滑性較差，或溫度>80℃ ,使用外置軸承結構的泵;3. If the lubricating property of the conveying medium is better and the teerature is less than or equal to 80℃，you arerecommended to select the pu with internal bearing; if the lubricating property of the conveying medium is poor and theteerature is higher than 80℃，you are recommended to select the pu with external bearing.
4、為了更好的避免雜質進入泵內，建議在泵的進口前配備過濾器，過濾精度為40目(過濾面積為過流通徑的15-20倍);
4. To better avoid the iurities from entering the pu, it is suggested to provide a filter with filtering accuracy of 40 mesh (filteringarea is 15 20 times of flow passage diameter) in front of pu inlet.
5、如您使用流量要求精確且不在性能參數表范圍內，您可以選用變頻電機實現，或者我公司根據您實際要求特殊制作
5. If the flow rate required is precise and out of the scope of the performance parameter table, you can use variable frequency motor,or contact our sales people for customized solution.

SNH2900R46U8W2循環泵三螺桿油泵

SNH2900R46U8W2循環泵三螺桿油泵

SN2900三螺桿泵常用規格匯總

SNH2900R40U12.1W3     SNF2900R40U12.1W3    SNS2900R40U12.1W3 

 SNH2900R46U12.1W3     SNF2900R46U12.1W3    SNS2900R46U12.1W3 

SNH2900R40U12.1W2     SNF2900R40U12.1W2    SNS2900R40U12.1W2 

 SNH2900R46U12.1W2     SNF2900R46U12.1W2    SNS2900R46U12.1W2 

SNH2900R40U12.1W23     SNF2900R40U12.1W23    SNS2900R40U12.1W23 

 SNH2900R46U12.1W23     SNF2900R46U12.1W23    SNS2900R46U12.1W23 

SNH2900R40U12.1W21     SNF2900R40U12.1W21    SNS2900R40U12.1W21 

 SNH2900R46U12.1W21     SNF2900R46U12.1W21    SNS2900R46U12.1W21

SNH2900R40U8W3     SNF2900R40U8W3    SNS2900R40U8W3 

 SNH2900R46U8W3     SNF2900R46U8W3    SNS2900R46U8W3 

SNH2900R40U8W2     SNF2900R40U8W2    SNS2900R40U8W2 

 SNH2900R46U8W2     SNF2900R46U8W2    SNS2900R46U8W2 

SNH2900R40U8W23     SNF2900R40U8W23    SNS2900R40U8W23 

 SNH2900R46U8W23     SNF2900R46U8W23    SNS2900R46U8W23 

SNH2900R40U8W21     SNF2900R40U8W21    SNS2900R40U8W21 

 SNH2900R46U8W21     SNF2900R46U8W21    SNS2900R46U8W21